Repairing The Headlights On A Scooter
Jason Uvios
A scooter with the safety feature of a headlight will require some
amount of maintenance so you always have a fresh bright headlight. A
headlight is generally sealed tight, so little or no water is going to
enter the headlight fixture. Many scooters are also available with a
scoop over the headlight to prevent additional moisture from reaching
the interior of the headlight.
If you do find that your headlight is getting a bit dim, or that you
have moisture in the headlight fixture you should replace it. Sometimes
a large jolt can break the headlight requiring replacement as well.
Every scooter varies in headlight replacement needs, but the headlight
is very similar to that of a car.
In order to make your scooter road worthy make sure that its turn
signals breaks, headlamps, and chains are intact. This will ensure
safety for both the rider as well as the vehicle. Other safety
accessories that are a must with a scooter are helmets; drive belts,
alarms and locks.
Since the markets have rolled out so many different types of scooters,
which vary in shapes, sizes as well as functionality therefore their
accessories also differ from model to model.
The headlight that requires a bulb replacement will use a very small
bulb, just a size larger than that of a bulb found on a string of
lights. Removing the headlight can be accomplished using a screwdriver
or a wrench. Some scooters are available with easy to remove headlights
that require no tools at all but the movement of a few slip connections
to remove the headlight. Simply remove the old bulb, insert the new
bulb, and refasten the headlight to the scooter.
Headlights that are one piece, with no interior bulb are easy to
replace as well. The one-piece headlight generally is going to require
a hex screwdriver or a regular screwdriver to remove the headlight. You
can purchase replacement headlights through medical supply houses,
through scooter retailers and online headlight sources. Knowing the
make and model of your scooter will allow for easy replacement of your
scooter headlight.
The once piece headlight is taken out by removing two or four screws
that hold it in place. Once you have removed the screws, you pull out
the headlight, and unplug the headlight from the scooter. The new
headlight will plug into the electrical outlet, and then you place the
headlight back into the socket. You should be sure to replace all of
the screws you have taken out so your headlight is secure and in place
once again.
Remember, every scooter is different, and the type of headlight your
scooter is equipped with will be detailed in the manual provided with
your scooter.
Jason Uvios writes about on Repairing Flat Tires On A Scooter to visit
:- http://www.scooter-europe.info
, http://www.scooter-forall.info and
http://www.scooter-canada.info
<<---------------- End of Free Reprint Article ------------->>
Back To:
Index of All Automotive & Truck Articles
Index of Motorcycle & Off Road Articles
Find More Free Articles
Index of All Free Reprint Articles
